Marine Guidance Note

MGN 353 Amendment 3

Amd 3 (control of vibration at work) regs 2007

In force
In force
Version
Amendment 3
Published
24 September 2025
Applies to
Merchant ships · Fishing vessels · Large commercial yachts · Small commercial vessels
Topics
Crew certification · Medical · Safety equipment

xplor’s summary, not the official text

This guidance note, Amendment 3 to MGN 353, explains the Merchant Shipping and Fishing Vessels (Control of Vibration at Work) Regulations 2007 on protecting workers from hand-arm and whole-body vibration. Employers and shipowners must assess vibration risks, apply exposure action and limit values, control exposure, provide information, training and health surveillance, and consult workers. The amendment extends worker protections to all seafarers and fishermen regardless of employment status, reflecting the 2014 MLC health and safety amendments and the 2018 Work in Fishing amendments. The guidance is not definitive and each employer must assess its own vessels. Exemptions for whole-body vibration may be sought from the MCA.

Written by xplor from the notice's text on 17 November 2026. It is a summary, not the notice: rely on the official text.

For yacht crew

Employers of crew on commercial yachts must assess vibration risks, including whole-body vibration from fast craft such as RIBs and tenders, and provide information, training and health surveillance where needed.

What changed in Amendment 3

Amendment 3 reflects the MLC Health and Safety amendments and the Work in Fishing Consequential Amendments, extending worker protections to all seafarers and fishermen regardless of employment status and applying employer duties to shipowners and fishing vessel owners.

xplor's summary of the change, not the MCA's.

Sections of the notice

  1. Summary
  2. 1. Introduction
  3. 2. Applicability
  4. 3. Vibration exposure limit values and action values
  5. 4. Assessment of risks (regulation 6)
  6. 5. Elimination or control of exposure to vibration (regulation 7)
  7. 6. Worker information and training (regulation 8)
  8. 7. Health surveillance and record keeping (regulation 9)
  9. 8. Consultation with workers (regulation 10)
  10. 9. Persons on whom duties are imposed (regulation 11)
  11. 10. Exemptions (regulation 12)
  12. 11. Enforcement and penalties (regulations 13 to 15)
  13. 12. Main provisions of the vibration regulations
  14. More information
  15. Annex A – Hand-arm vibration
  16. What is hand-arm vibration?
  17. When is hand-arm vibration hazardous?
  18. What health effects can hand-arm vibration cause?
  19. What are the early symptoms?
  20. What effects do these symptoms have?
  21. What kinds of tools and equipment can cause ill health from vibration?
  22. What do the regulations require employers to do?
  23. What is the exposure action value (EAV)?
  24. What is the exposure limit value (ELV)?
  25. What does an employer need to do to get started?
  26. Consultation
  27. Assess who is at risk
  28. How should employers use this information?
  29. High risk (above the ELV)
  30. Medium risk (above the EAV)
  31. Low risk (below the EAV)
  32. Estimating exposure
  33. Table 1 - Some typical vibration levels for common tools
  34. Table 2 -Simple ‘exposure points’ system
  35. Vibration measurements for equipment produced by the employer
  36. What are the responsibilities of tool and machine manufacturers and suppliers in relation to vibration?
  37. How can the risks from hand-arm vibration be controlled?
  38. Alternative work methods
  39. Purchasing policy for replacing old equipment and tools
  40. Workstation design
  41. Maintenance
  42. Work schedules
  43. Clothing
  44. Annex B – Whole body vibration
  45. What is whole-body vibration?
  46. Who is likely to have high exposures to whole-body vibration?
  47. What are the health effects of whole body vibration?
  48. When is exposure to whole-body vibration likely to lead to back pain?
  49. Are any employees at particular risk?
  50. What do the regulations require employers to do?
  51. What is the exposure action value (EAV)?
  52. What is the exposure limit value (ELV)?
  53. Assessing the risks - how to get started
  54. How is a risk assessment undertaken?
  55. Measuring exposure
  56. Is it always necessary to measure workers’ exposure to vibration?
  57. If workers’ exposure is not measured how is it possible to know they are exposed above the exposure limit value?
  58. How can vessel and equipment manufacturers help?
  59. How are the risks from whole-body vibration to be controlled?
  60. Train and instruct workers using vessels/equipment which can cause whole-body vibration Such workers should:
  61. Choose machinery suitable for the job
  62. Maintenance
  63. Other measures
  64. How can it be established whether risk control measures are working?
  65. What information and training should be given to workers?
  66. Consultation
  67. Annex C – Health surveillance for both hand and arm and whole body vibration and additional sources of guidance
  68. When should health surveillance be provided?
  69. How can it be established if the steps taken to control risks are working?
  70. Providing health surveillance
  71. How is health surveillance carried out?
  72. What can be expected from an occupational health service provider?
  73. What do employers have to do with the results of health surveillance?
  74. How is health surveillance carried out?
  75. What can be expected from an occupational health service provider?
  76. What do employers have to do with the results of health surveillance?
  77. What information and training should be given to workers?
  78. Annex D - Additional guidance
  79. MCA Publications
  80. BSI Publications

The notice's own headings. The text of each is in the official notice on GOV.UK.