Marine Guidance Note
MGN 379 Amendment 1
use of electronic navigational aids
- Version
- Amendment 1
- Published
- 16 November 2023
- Updated on GOV.UK
- 9 January 2024
- Applies to
- Merchant ships · Fishing vessels
- Topics
- Navigation
xplor’s summary, not the official text
This amendment to MGN 379 emphasises the correct use of electronic navigational equipment by watchkeepers on merchant ships and fishing vessels. It stresses that each electronic aid is only a navigational aid, that position fixing must be cross-checked by other methods including non-electronic ones, and that over-reliance on a single aid or its output is dangerous. It also covers radar, GNSS, ECDIS and AIS limitations, and updates references, procedures, technology and terminology. It replaces MGN 379.
Written by xplor from the notice's text on 17 November 2026. It is a summary, not the notice: rely on the official text.
What changed in Amendment 1
It updates references, procedures, technology and terminology that have developed since the first version of the notice.
xplor's summary of the change, not the MCA's.
Sections of the notice
- Summary
- 1. Introduction/background
- 2. Provision of navigational equipment on ships
- 3. RADAR
- 3.1 General
- 3.2 Electronic radar plotting and tracking aids
- 3.3 Monitoring of targets
- 3.4 Verifying equipment performance.
- 3.4.1 Operational checks
- 3.5 Choice of settings and parameters
- 3.6 Stabilisation and Motion
- 3.6.1 Stabilisation
- 3.6.2 Motion (Relative/True)
- 3.6.3 Use of Target Trails
- 3.6.4 Display orientation modes
- 3.7 Operation
- 3.8 Parallel Indexing
- 3.8.1 Parallel indexing technique
- 3.8.2 Integration with ECDIS
- 3.8.3 Precautions
- 3.9 Speed Log Failure
- 3.10 Gyro failure
- 3.11 Warnings and alarms
- 3.12 Evolving Technologies
- 4. Electronic Positioning Systems
- 4.1 General
- 4.2 Global Navigation Satellite Systems (GNSS)
- 4.3 Augmentation
- 4.4 E-LORAN
- 4.5 GNSS Reliance and checking
- 4.6 GNSS Integrity and checking
- 4.6.1 Dilution of Position (DOP)
- 4.6.2 Receiver Autonomous Integrity Monitor (RAIM)
- 4.7 Datums
- 5. Electronic Navigation Systems and Charting
- 5.1 General
- 5.2 ECDIS Sensors
- 5.3 Electronic Navigational Charts (ENCs)
- 5.4 Raster Navigational Charts (RNCs)
- 5.5 Chart maintenance and catalogues
- 5.6 ECDIS Performance Standards
- 5.7 ECDIS Alarms and Indicators
- 5.7.1 Alarm fatigue and excess alarms
- 5.8 Overreliance on GNSS for position fixing.
- 5.9 Navigation planning and execution
- 5.9.1 Safety contour, soundings, shades
- 5.9.2 Category zones of confidence (CATZOC)
- 5.9.3 Cross track distance (XTD)
- 5.9.4 Cross Track Corridor (XTC)
- 5.9.5 Anti-grounding and look-ahead features
- 5.9.6 Chart display and features
- 5.9.7 Colour schemes
- 5.9.8 Conclusion
- 5.10 ECDIS Overlays
- 5.11 System based datum conversions
- 5.12 Backup
- 6. Automatic Identification Systems (AIS)
- 7. Conclusion
- 8. Relevant MCA references
- More information
The notice's own headings. The text of each is in the official notice on GOV.UK.