Marine Guidance Note

MGN 503

Amendment No.1 (F) Procedure for Carrying out Small Fishing Vessel Stability Tests

In force
In force
Version
As first issued
Published
20 September 2022
Updated on GOV.UK
14 August 2024
Applies to
Fishing vessels
Topics
Safety equipment · Survey and certification

xplor’s summary, not the official text

This MGN amends MGN 503 (F) and is aimed at owners, operators, builders, designers, surveyors and harbour authorities of fishing vessels. It guides owners and skippers of small fishing vessels in assessing stability under MSN 1871 Amendment No.2, the Code of Practice for small fishing vessels under 15m. It sets out four stability tests (roll period simplified, roll period minimum metacentric height, heel suspended weight, and offset load), their acceptance criteria, preparation and environmental conditions, remedial action, certificate conditions, and repeat testing every five years. It is to be read with MGN 526 (F) and the Wolfson Stability Notice.

Written by xplor from the notice's text on 17 November 2026. It is a summary, not the notice: rely on the official text.

Sections of the notice

  1. 1. Summary
  2. 2. Introduction
  3. 3. The Tests
  4. 4. The Roll Period Test - Simplified Method
  5. 5. The Roll Period Test – Minimum Metacentric Height
  6. 6. The Heel Test – Suspended Load Method
  7. 7. The Heel Test - Offset load Test
  8. 8. The Result and Action to Take
  9. 9. Preparation – all tests
  10. 9.1 Vessel-Loading condition
  11. 9.2 Vessel Clearance
  12. 9.3 Moorings
  13. 9.4 Environmental Conditions
  14. 10. Tests to be repeatable
  15. 11. Conditions on Small Fishing Vessel Certificate
  16. 12. Requirement to maintain freeboard / clear height at side
  17. 13. Home and Dry
  18. 14. Standards
  19. 15. More information
  20. ANNEX A: The Roll Period Test - Simplified Method
  21. 1. Conducting the Roll Test
  22. 2. Tender Vessels
  23. 3. Suitability of test
  24. ANNEX B – The Roll Period Test – Required Metacentric Height GMr
  25. 1. Conduct of the test
  26. 2. Application of average roll period:
  27. 3. Calculation of the actual metacentric height GM
  28. 4. Test Result:
  29. 5. Suitability of test
  30. ANNEX C: Heel Test - Suspended Weight
  31. 1. Conducting the Heel Test – Suspended Weight
  32. 2. Conducting the Heel Test
  33. 3. Suitability of test
  34. ANNEX D: The Heel Test - The Offset Load Test
  35. 1. Conducting the Offset Load Test
  36. 2. Suitability of test

The notice's own headings. The text of each is in the official notice on GOV.UK.