Marine Guidance Note

MGN 645 Amendment 1

load line length – policy clarification: hull form cut-outs, extensions and steps

In force
In force
Version
Amendment 1
Published
10 April 2026
Updated on GOV.UK
14 April 2026
Applies to
Merchant ships · Large commercial yachts · Small commercial vessels
Topics
Survey and certification

xplor’s summary, not the official text

MGN 645 (M) Amendment 1 clarifies how the MCA interprets Load Line Length (L) for vessels whose hull forms include cut-outs, removable end sections, stepped or recessed freeboard decks and reverse sheer. It states that cut-outs covered by fairing pieces, and detachable bow or stern sections fixed in place during normal operation, will be counted in L, and that stepped decks aft will be treated according to the step length of more or less than 1 metre. The MCA and authorised bodies will refuse to certify as small commercial vessels any vessel using these methods to reduce L below 24 metres. It also notes that RCD hull length differs from Load Line Length and addresses commercial use of yachts over 24 metres.

Written by xplor from the notice's text on 17 November 2026. It is a summary, not the notice: rely on the official text.

For yacht crew

Yachts whose Load Line Length is 24 metres or more, including those using fairings or removable sections, must comply with the Large Yacht Code and UK Load Line Regulations if operated commercially.

Sections of the notice

  1. Summary
  2. 1. Introduction
  3. 2. Background
  4. 3. Definitions
  5. 4. Methods employed to keep L below 24 metres
  6. 5. MCA Policies on the Methods Employed to keep L below 24 metres
  7. 6. Note on interpretation of “full width” step or recess
  8. 7. Length Measurement – RCD and Load Line
  9. 8. Policy Position
  10. More information

The notice's own headings. The text of each is in the official notice on GOV.UK.